Aluminum die-casting mold pre-delivery inspection standards
Publish Time: 2024-11-04
Aluminum die-casting molds must be inspected before leaving the factory, and they can only be put into use if they meet the qualified standards. The specific standards are:
1. The chemical composition inspection and testing methods in aluminum die-casting molds, the inspection standards and re-inspections must meet the standards of GB/T15115. The chemical composition of the sample product can be obtained from die-casting to meet the requirements of GB/T15115; the mechanical properties in the mechanical properties, the inspection methods, the number of inspections and the inspection specifications must meet the requirements of GB/T15115.
2. The sample products used in aluminum die-casting molds, the size of the cut parts, and the inspection test style must be discussed and decided.
3. The geometric style of die-casting inspection and testing can be obtained by extracting samples from a large range or using the standards of GB2828 and GB2829 for inspection and testing, and the results of the inspection and testing must meet the specifications.
4. The factory inspection of the surface quality of aluminum die-casting parts must be inspected one by one, and the inspection results must meet the requirements of this standard.
5. The roughness of the surface of aluminum die-casting molds must be implemented according to the standard of GB/T6060.1.
