Aluminum die casting mold process problem solving

Some very common problems usually occur during the processing of aluminum die casting molds. Each problem must be solved according to the actual situation. Here are some common solutions for you. I hope it will be helpful to you:

1. The die casting factory renovates and changes the Aluminum die casting mold, renovates and changes the pouring system, strengthens the internal pouring port, and adds overflow grooves, exhaust gas grooves, etc.

2. Clean the parting surface, clean the mold cavity, and clean the top lever; change the coating material and improve the spraying technology; strengthen the mold clamping ability and increase the weight of the poured metal. These are some aluminum alloy die-casting methods that can be implemented with simple control.

3. Replace the principle, select high-quality aluminum alloy ingot materials, improve the ratio of the new principle and the return principle, and improve the smelting processing skills.

4. Adjust the parameters of the processing technology, injection capacity, injection speed, mold filling time, mold opening time, pouring air temperature, mold temperature, etc.